home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software Vault: The Sapphire Collection
/
Software Vault (Sapphire Collection) (Digital Impact).ISO
/
cdr49
/
syt555.zip
/
OIBMTHNK.EXE
/
README.TXT
Wrap
Text File
|
1994-07-29
|
3KB
|
70 lines
SYTOS PLUS FOR OS/2 1.37
IBM THINKPAD 555MB
DRIVER DISKETTE
July 5, 1994
************************************************************
This Driver Diskette includes the following device driver:
IBM THINKPAD 555MB
This Readme provides the following information:
1.1 Installing "IBM THINKPAD 555MB" Using Driver Disk
1.2 Installing SCSI Adapter Device Drivers under
IBM OS/2 Version 2.x
1.1 INSTALLING "IBM THINKPAD 555MB" USING DRIVER DISK
To install the device driver, follow these steps:
1. "Select one of any backup device .. from the Utilities".
2. Insert this diskette into your diskette drive, and
select [Driver Disk].
3. In the "Load Device Drivers Diskette" window, enter
the letter that represents your drive (A: is the
default), and select [OK].
4. At the "Select Backup Device Drivers" window, select
the driver name and choose [OK].
5. To add the device to the backup device list, select
"Add new device" at the "Backup device setup..."
window.
6. Configure the backup device using instructions in the
Sytos Plus User's Guide.
Ensure that the SCSI adapter driver is installed as
described in the following section.
1.2 INSTALLING SCSI ADAPTER DEVICE DRIVERS UNDER IBM OS/2
VERSION 2.x
Currently this release of Sytos Plus supports TMC-850IBM SCSI host
adapters. Future support will follow. In order to run Sytos Plus with a
SCSI host adapter in the IBM OS/2 2.x environment, make sure the
following two lines appear in your CONFIG.SYS file:
BASEDEV=FD850IBM.ADD
BASEDEV=OS2SCSI.DMD
where FD850IBM.ADD corresponds to the SCSI Adapter
Device Driver.
NOTE: FD850IBM.ADD should be on the option
diskette that comes with your host adapter.
If the lines are not in CONFIG.SYS, refer to your
IBM OS/2 2.x documentation to add them.
NOTE: Under version 2.0, you must have the
OS/2 v2.0 Service Pack (Version XR06055),
also known as the Corrective Service
Facility, installed on your system to
support backup devices that use SCSI host
adapters. If you do not have the OS/2 v2.0
Service Pack installed, you will encounter
problems running Sytos Plus under OS/2
v2.0. Contact your IBM representative to
obtain the Service Pack.
Reboot your system to let these changes take effect.
NOTE: This file is being distributed with permission of Sytron Corporation.
*** END OF README ***